是一家集彎箍機等智能鋼筋深加工裝備研究 、設計 、制造 、銷售
于一體的創新型企業

服務咨詢電話:

183-6310-3232
Industry Trends

公司實力雄厚,重信用,守合同,以產品質量和服務質量為主,贏得了廣大客戶的高度信任

>>

How to use the trowel

  來源:www.bidonthecape.com
The main structure of the trowel is a trowel rotor driven by a gasoline engine. A spatula is installed on the bottom of the cross in the middle of the rotor. The inclination direction of the spatula is consistent with the rotation direction of the rotor, and the triangular belt driven by the gasoline engine makes the trowel rotor rotate. During operation, start the fire first and hold the control handle. Pushing forward together means moving forward, and pulling back together means moving backward. It can do 100-300m2 per hour on average. Compared with manual troweling, the efficiency can be increased by more than 30 times. Widely used in the construction of urban roads, as for the specific how to use, troweling machine manufacturers through the following article to do a detailed introduction.

1. Start up, wipe the handle

2. Hold the lever tightly to keep the fuselage balanced

3. When the troweling machine works, it is necessary to stabilize the trowel machine, and adjust the direction in time when working on the floor, so as to avoid losing control of the machine

4. First rough grinding, then fine grinding. After rough grinding, wait for the ground

Polishing machine manufacturers to do a detailed introduction, I hope you can seriously understand, there is a need for polishing machine friends to our factory inspection and purchase at any time.

上一條:沒有了
下一條:沒有了
城市分站:主站   山東   浙江   北京   天津   福建   河南   湖北   江西   江蘇   陜西   
亚洲彩票下载安卓版