服務咨詢電話:

400-077-0818   133-7115-1012
產品展示

公司實力雄厚,重信用,守合同,以產品質量和服務質量為主,贏得了廣大客戶的高度信任

>>
  • 產品名稱: Straightener
  • 產品分類: Construction Machinery
  • 聯系方式: 400-077-0818
  • 公司名稱: 山東拾捌機械科技有限公司
  • 公司地址:威海市經濟技術開發區海峰路34號6
  • 添加時間: 20/11/02
產品詳情

Straightening machine is also called straightening machine, straightening and breaking machine, straightening and cutting machine. It belongs to a kind of straightening equipment. Straightening machine is one of steel processing machinery. It is used for straightening and cutting steel bars with diameter less than 14 mm. The cutting length can be customized according to customer requirements. It can cut stainless steel wire, aluminum wire, cold drawn wire, plastic coated steel wire, etc., with neat incision, small error and good performance.

Operating principle: the motor increases speed through the belt drive to make the straightening cylinder rotate at a high speed, and the steel bar passing through the straightening cylinder is straightened, and the rust on the surface of the steel bar is removed by the straightening mold; the motor drives two transmission rollers and the gear reducer through another pair of deceleration belts, on the one hand, it drives two transmission rollers to pull the reinforcement forward, on the other hand, it drives the crank wheel to make the hammer head move up and down. When the steel bar is adjusted to the predetermined length, the hammer hammers the upper tool holder to cut off the steel bar. When the cut steel bar falls into the receiving frame, the cutter head will return to its original position due to the spring action to complete a cycle.
Performance structure: straightening mechanism is composed of straightening roller, straightening pressing block and bearing pedestal at both ends to complete the straightening work of wire rod. Its power is the motor installed in the lower part of the frame, which drives the straightening shaft to rotate at high speed through the triangle belt. The feeding mechanism - pressure wheel part is composed of two synchronous pressure wheels, which drive a pair of gear pairs through V-belt chain transmission, and a pair of coaxial pressure wheels will run synchronously.

When working, the metal wire moves forward under the action of friction force through the groove of the outer circle of the pressure wheel. The feed speed of the wire can be changed by adjusting the spring of the pressure wheel. The large value is equal to the linear velocity of the outer circle of the roller. In order to obtain good straightening effect and production efficiency, the pressure should be adjusted according to the diameter and rigidity of the wire rod. Cutting mechanism -- the cutting mechanism is composed of an eccentric mechanism and a knife rest at one end of the straight wire path to complete the cutting action. The eccentric mechanism is composed of main shaft, slide block, eccentric wheel, rocker arm and punch. Its power is driven by cutting motor through V-belt to rotate the main shaft. Under the action of eccentric mechanism, the punch does up and down reciprocating motion. When the wire in the groove of the straight wire path reaches a fixed length, the wire will push the straight wire groove forward under the friction force of the pressure wheel group, and the boss at the back of the punch block at the top of the cutter head moves to the working stroke of the punch. At this time, the punch block impacts the cutter head and cuts off the metal wire rod at a fixed length. At the same time, when the punch block goes down, the slot sealing torsion iron is pressed under the punch block to make the wire sealing rod rotate around the guide rod, and the wire rod cut in the wire slot will fall into the wire bucket automatically under the action of gravity. When the punch goes up, the cutter head will also go up. Under the action of the torsion spring, the wire sealing rod will seal the wire slot again. After the wire rod thrust disappears, the straight wire groove returns to the initial state under the action of the tension spring and enters the next cycle. Wire dropping mechanism -- the material carrier is composed of cyclone, stopper rod, mandrel, base, etc. the coil can rotate around the spindle. After placing the coil wire, the cyclone can feed continuously and automatically under the pull of the feed mechanism.



以上是關于Straightener廠家,Straightener價格,Straightener批發,Straightener哪家好,Straightener供應的詳細介紹
地區產品: 山東Straightener,浙江Straightener,北京Straightener,天津Straightener,福建Straightener,河南Straightener,湖北Straightener,江西Straightener,江蘇Straightener,陜西Straightener。
城市分站:主站   山東   浙江   北京   天津   福建   河南   湖北   江西   江蘇   陜西   
亚洲彩票下载安卓版